Oricom Secure 710 Premium Digital Video Baby Monitor

Keep a careful eye on your baby, night and day, from anywhere in your home with Oricom’s latest Premium Digital Video Baby monitor.
The Oricom SC710 boasts a large 2.4" Colour LCD display, infrared night vision, temperature monitoring and is multi-camera capable so you can connect up to four cameras.

Oricom Baby monitors give you the peace of mind and freedom to get on with other things around the home.   

Multi-camera capable, up to 4 cameras, sold separately (SC710 or CU850PT)


Baby Unit
Wall mountable Infrared Camera 
Gives you a clear picture of your baby even in the dark.
Nursery room temperature sensor
Constantly displays the nursery room temperature 
Soft comforting adjustable night light
No need to leave your baby in darkness, a soft starry glow from the night providing comfort and reassurance for your baby, soothing the way to sleep.
Five polyphonic lullabies
Providing a soothing auditory distraction to lull baby off to sleep.
Sound Sensor lights
You can use the sensor lights on the Parent Unit to monitor the noise levels in your baby's room, when the volume on the Parent Unit is turned down low.  
Parent Unit
2.4" Colour Display
Large clear display allows you to keep an eye on your baby anywhere around the home.
Parent talk back
This features allows you to talk to your baby whenever you need to use the comfort only your own voice can give.
Multi-Camera Capable
Connects to up to 4 camera units (CU710). Great for twins or for keeping a watchful eye on multiple children.
Fully portable
This parent unit provides you with mobility and the hands-free convenience that will allow you to go about your everyday work and still be able listen to your baby.
Adjustable digital volume control
Adjust the volume level as needed.
3 year warranty 
Peace of mind. Buy your Oricom product with confidence.  
Feature Value
Camera (baby unit) Socket: 6 V DC Sensor: 1 night light sensor IR diodes: 6pcs
Monitor (parent unit) Screen: 2.4" LCD display Socket: 6 V DC 
Battery Pack for Parent unit Rechargeable Li-ion Polymer Battery pack 3.7V 1500mAh
Power supply (parent unit) AC Power adaptor, input: 100-240 VAC, 50-60Hz, 150 mA Power adaptor plug, output: 6 VDC, 800 mA 
Battery performance Initial charge time Up to 12 h. Up to 8 hours of continuous operation on fully charged battery with VOX turned ON.
Power supply (baby unit) AC Power adaptor, input: 100-240 VAC, 50-60Hz, 150 mA Power adaptor plug, output: 6 VDC, 800 mA or 4 AAA Alkaline batteries 
Range Up to 150 meters under optimum conditions. Range is reduced in buildings through walls, doors etc. 
Frequency range 2.4 GHz Digital FHSS
Permissible ambient temperature 0°C to 40°C

Note: For a replacement battery pack or other spare parts please contact Oricom.


Baby Monitor Secure710 - FAQ's
My Baby Monitor Keeps Showing 'Out of Range', what should I do?
The most likely reason for receiving the out of range alert and limited range on your baby monitor is frequency congestion. If this is the cause, resetting your monitor will avoid busy channels. 
1.Turn both Camera and Parent units off and remove the battery in the parent unit. Leave unplugged for 5mins. 
2.If you have Wi-Fi in the home, make it busy by streaming a video on YouTube or similar. 
3.Turn the camera back on wait for 30 seconds. 
4.Ensure the antenna on both the parent unit and camera unit is in the vertical position. 
5.Plug the battery into the parent unit and turn on. 
If the display is still showing “Out of Range” please relink the units as instructed in the user guide. When relinking it is best to keep the camera and parent units close together (within 1m) and keep clear of all other electronic devices including mobile phones, tablets or computers. If this process is unsuccessful please contact our support team and we will assist you further. Phone: 1300 889 785

How do I register a new camera unit?
1.     Switch on the parent unit.
2.     On monitor mode, press and hold key for 5 seconds, it will switch to registration mode.
3.     After registration icon appears, press the arrow up or arrow down button to select the camera channel [C1] or [C2] or [C3[] or [C4] that you want the baby unit to pair with.
4.     Press and releasekey to confirm which camera number to be registered.
5.     The Link LED then flashes rapidly for 10 seconds.
6.     Switch the baby unit ON. Press the pair key once (at the back of the camera).
7.      If registration is completed, camera video appears on LCD screen and returns to normal mode. The baby unit will also return to normal mode.
8.     If the registration time is expired or registration fails, [Out of Range] appears on the LCD.
How many cameras can I connect to the one parent unit?
The SC710 can connect up to 4 camera units (CU710) to the one parent unit.  The original unit is supplied with one camera.  Additional cameras can be purchased from our online store or from your local baby store. Note: The SC710 can connect to both CU710 and CU850PT Motorised Pan-tilt camera units.
The amber light stays illuminated on my parent unit even when finished charging.
That’s ok. The amber light indicates that power is being supplied to the cradle.  Even when the battery is fully charged, the amber light will stay on.
I don’t seem to be getting the best possible range from my unit.
To get the optimum range from your SC710, extend both the antenna on the camera unit and the antenna on the parent unit vertically, so they point straight up.  Keep in mind that doors, walls and electrical equipment can reduce the range of your unit.
When I put my monitor on ‘scan’ the cameras say “out of range”, but they work singularly.
Ensure your cameras are selected to be in the scan sequence.  You can check this by pressing the camera button to display each camera.  Each camera number should have a tick mark against it.  If it has a cross, simply press the up or down volume key to change it to a tick. This will include that camera number in the scan sequence.
My parent unit screen goes blank after 10 seconds.
This may be as a result of the VOX (sound detection) setting.  The screen will turn off when no sound is detected, but will reactivate when the sound threshold reaches a set level, or when any button on the parent unit is pressed.  The VOX setting can be activated or deactivated via the menu key.
How long should my battery last?
Depending on the usage of the monitor, the parent unit will work for up to 8 hours on a brand new, fully charged battery with the VOX feature turned on.  When the battery level becomes low, the amber power LED will flash slowly.  At this point you will need to return the parent unit to the charger.  Over time your battery life may become shorter.  When the battery life is no longer suitable, we suggest you replace your battery.  These can be purchased in our online store.
My screen is showing in black and white, not colour.
The camera has high-intensity infrared LEDs for picking up clear images in the dark.  When the built in photo sensor detects a low level of ambient light, the LEDs will automatically activate and the screen on the parent unit will display in black and white.
What are the lullabies on this unit?
1- Twinkle Twinkle Little Star
2- Silent Night
3- Minuet in G Major
4- Londonderry Air 4
5- Blue Danube
My Monitor is telling me the temperature is 3 to 4 degrees higher than the room temperature
The sensor on the back of the baby unit should be positioned as far away from the monitor as possible in a horizontal direction.  There should be some airflow around the sensor to allow the temperature of the room to be measured the tolerance of the displayed temperature  is + or -2 degrees C                  
On my SC710 screen I am seeing HI/LO flashing indicator, but, I have temperature warnings Off. 
Even with the temperature warning alarm turned off, The indicator icon for Low or High temp will still flash, Hi will flash when the temperature is over 30 degrees C, Lo will flash when the temp is below 16 degrees C, however the audible alarm will not indicate with temp warning off.
This is simply an additional feature that gives an indication of hi/lo temperature, without the alarm function.
My SC710 is not showing any picture from my camera could it be de-linked or deselected.
This can happen sometimes when you have clicked on the camera and then volume down(within 8 seconds of one another), This will put an X next to the camera, to re-check and establish the link before having to do a full re-link follow this process.
Press the camera symbol on the Parent unit, this will show C1, (if your camera unit is another e.g. C2,C3 or C4 push button until that camera shows).
Then press the Volume up button on the parent unit within 8 seconds this will bring the camera unit back into link, you will see a check mark next to the specified camera Icon.
This will only work if the camera unit has been de-checked (showing an X beside the specific camera) and will not work if you have attempted the full relink process first.
If the above process does not work please follow the full registration process on page 8 of the User Guide
Scan mode on the SC710
If the VOX is set to ‘ON’ for each camera unit, it will, when that camera is selected and the audio level is above the VOX threshold, turn the display back on for all cameras,  to turn the display off again the display off button must be pressed.
If the vibration is turned on (each camera), the volume is set to off (each camera), VOX set to on (each camera), scan selected and the display set to off, if the noise level on the selected (in scan mode) camera is above the VOX threshold then the display will be turned on and vibration activated once the display is on it will not automatically turn off the ‘Display off’ button must be pressed again to turn the display off.
Each camera unit can be set with vibration on or off and VOX level set to desired level this allows the Vibration to be active for one camera and audio, or audio and vibrate for another camera, in all conditions if the display is off it will be turned back on for all cameras and will stay on until the ‘Display off’ button is pressed.
When in scan mode the VOX only works to turn the display on it will not turn the display off, this must be done by pressing the ‘Display off’ button, it is not possible to set the display to turn off automatically when in scan mode.
In any mode when the display is off it can be turned back on by pressing any button on the parent unit, the normal function for that button will be accessed on the 2nd push after the display has turned on 
Scan mode is the predominate setting on the sc710 when the unit is set to scan and VOX mode, all functions for scan mode will occur before the operative function of the VOX mode is present and able to function, this will be explained below.
Scan Mode
When multiple cameras are registered to the parent unit, the scan mode will cycle through each camera, displaying the image for 10 seconds. The audio for the associated image will be played, i.e. if camera 1 image is displayed, you will receive the audio for camera 1. The parent unit will continue to scan through all cameras connected. If you need to view a camera for more than 10 seconds, deactivate the scan mode.
Scan and VOX mode on the SC710 using multi camera
If the VOX is set to ‘ON’ for each camera unit, it will, when that camera is selected and the audio level is above the VOX threshold, turn the display back on for all cameras,  to turn the display off again the display off button must be pressed.
In a night vision setting (when there is little or no ambient light) the infrared LED’s will switch on for the camera that has registered the sound, this can occur at the moment that the scan switches between cameras and can cause one or more of the linked cameras to not turn the infrared LED’s on.

Related Items

Join Us !


Sign up to our newsletter to be the first to find out about our latest sales, products and promotions.